Category:Spot-On Models

From The Brighton Toy and Model Index
Toy Brands and Manufacturers

Retail display stand (Tri-ang Spot-On Models).jpg

Spot-On Models

1959 - 1967
~1960: Front cover of the First Edition colour catalogue

~1960: Front cover of the First Edition colour catalogue [image info]

~1960: Rear cover with Castlereagh identification

~1960: Rear cover with Castlereagh identification [image info]

~1965: Clear window packaging

~1965: Clear window packaging [image info]

~1965 catalogue cover, Austin 1800

~1965 catalogue cover, Austin 1800 [image info]

~1967: 7th Edition catalogue, front cover

~1967: 7th Edition catalogue, front cover [image info]

~1967: 7th Edition catalogue, back cover

~1967: 7th Edition catalogue, back cover [image info]

Spot-On Gift Set 702

Spot-On Gift Set 702 [image info]

Front cover "The Ultimate Book of Spot-On Models Ltd", by Nigel Lee, Graham Thompson and Brian Salter (In House, 2013)

Front cover "The Ultimate Book of Spot-On Models Ltd", by Nigel Lee, Graham Thompson and Brian Salter (In House, 2013) [image info]

Back cover of "The Ultimate Book of Spot-On Models Ltd", by Nigel Lee, Graham Thompson and Brian Salter

Back cover of "The Ultimate Book of Spot-On Models Ltd", by Nigel Lee, Graham Thompson and Brian Salter [image info]

Front cover of Spot-On Diecast Models by Triang, A Catalogue and Collector's Guide", ISBN 0854293043, by Graham Thompson

Front cover of Spot-On Diecast Models by Triang, A Catalogue and Collector's Guide", ISBN 0854293043, by Graham Thompson [image info]

Tri-ang Spot-On (or Spot-On Models) was primarily a range of diecast metal toy vehicles with plastic interiors, produced by toymaking behemoths Lines Brothers (brand-name "Tri-ang") at their Castlereagh site, Belfast, between 1959 and 1967. This was a high-quality range whose production ended shortly after the Lines Brothers' acquisition of Dinky Toys. The Spot-On marque was also used on contemporary building construction sets and roadway sets made at the same factory, for a range of dollhouse furniture made at the same site with the same technologies, and for a range of rubber moulded accessory buildings launched at around the same time, but made in Wimbledon.

Historical background

Meccano Ltd.'s Dinky Toys range had practically owned the diecast model cars market in Britain since its launch in the 1930s, but Mettoy-Playcraft had launched a competing Corgi Toys range in 1956 and shown that it was possible to compete with Dinky if one had a more modern product range that made good use of improvements in diecasting to make more accurate and less stylised toys, and if one made use of the new plastics for extra features like moulded transparent windows.

By the 1950s, Triang's existing mostly-metal road vehicles ranges were a bit old – the company had originally been known for prams, bicycles and pedal-cars, and had introduced smaller sheet-metal cars, then miniaturised these to gauge 0 model railway scale with the rather lovely Tri-ang Minic range, but toy manufacturing and car design had both since moved on, and the switch to diecasting was probably an overdue development. Diecasting had come to dominate the toy car market, as it allowed makers to reproduce the complex curves and detailing of modern automobiles in a single simple process, to give a robust bodyshell that could easily be painted with an attractive high-gloss finish and assembled on a modern factory production-line.

~1960 promotional text

An Introduction.

Spot-On models by Tri-ang

Are built in a large modern plant in NORTHERN IRELAND. Here, under the most ideal conditions, a team of highly skilled DESIGNERS and PRODUCTION ENGINEERS, labour unceasingly to create for you, the most accurate, authentic and realistic models available today.

Each model is true to scale, 1/42nd of the size of the original vehicle, and built to the same high standard. Every perfect miniature, is a collector's item, and justly deserves pride of place in your collection.

Start Collecting Now!

SPOT-ON MODELS LTD. Castlereagh Road, Belfast N.Ireland, Lines Bros Group

— , Lines Brothers, , Spot-On catalogue First Edition, , ~1960

~1960: "An Introduction: Spot-On models by Tri-ang" – Heavy image processing used to bring out the faint background image, possibly representing the Castlereagh factory

Product differentiation

1:42-scale

With two large UK companies already battling it out in the market, Triang's range would have to be somehow different to both Corgi Toys's and Dinky Toys's. Where Corgi had produced more accurate reproductions of vehicles than the older Dinkies, unhindered by the overengineering that had been required by Meccano Ltd in the early days of diecasting, Spot-On would go one stage better, and produce even more accurately scaled vehicles – the Spot-On range would be scaled to a fractionally larger 1:42 scaling rather than the nominal 1:43 of Dinky, and where Dinky and Corgi both pragmatically adopted a somewhat "flexible" attitude to scaling depending on the size of the original vehicles, Spot-On vehicles would ALL be produced to exactly the same 1:42 scale, regardless of how big or small the result then had to be (or how much it cost to make!). Their dimensions would always be exactly right, or "spot-on", as emphasised by the Spot-On logo being accompanied by an image of a pair of measuring dividers in the vehicles range – although the pieces were likely to be played with in much the same way as Dinky Toys or Corgi Toys, Spot-On didn't have "toys" in the product name ... these were presented as models.

Because of their consistent scaling, Spot-On's double-decker buses and large lorries were consequently a lot larger than their Dinky and Corgi counterparts, and the company seemed to go out of their way to highlight the (authentic) size differences between some of their models by also making a model of the Isetta bubble car, which was probably the smallest British-built mass-produced car they could find.

~1960: "Only Spot-On models have ALL these features!"

Range

A further distinction was that in order to expand their ranges and their markets, both the Dinky and Corgi ranges tried to produce more foreign car designs that the UK market would find "exotic" - Dinky had the ability to "top up" their range by importing Continental-designed Dinky Toys made for the European market by Meccano France, and Corgi's Chief Designer Marcel van Cleemput made a point of dragging his design team around international motor shows to quickly measure up the latest new models from foreign car manufacturers. The Spot-On team seem to have decided that faced with the task of having to put together a whole new range of die-cast cars without the international contacts of their established competitors, that they wouldn't even try to produce foreign car models, and with a rare exception, the Spot-On range remained defiantly British. If it wasn't made it Britain, Spot-On wouldn't model it (the real versions of the aforementioned Isetta bubblecars were manufactured in Brighton, UK, at a site about five minutes walk from the toy museum, now named Isetta Square).

"Royal Occasion" Set 806, with Tommy Spot

Other products

Lines Brothers' range of manufacturing techniques and the plastics and diecasting facilities at the Castlereagh factory made it comparatively easy for the company to support Spot-On with accessories, which included roadside signs and people, garages and petrol stations, and the plastic Arkitex modern building construction sets (which were available in 1:42 and 00-scale). The third major Belfast Spot-On sub-brand (after the vehicles and Arkitex) was a range of 1:16-scale Spot-On dollhouse furniture (later rebranded as "Jenny's Home"), which like the cars, used a mixture of diecast metal and injection-moulded plastic.

An anomaly was the 1:42-scale Spot-On "Cotswold Village" range of moulded rubber buildings, which although designed to work with the new Spot-On vehicle range, and advertised in the vehicles catalogues, were actually made by a rubber moulding company in London that Lines Brothers had recently acquired, rather than in Belfast.

Discontinuation, 1967

Although the Spot-On range must have been quite expensive to design and launch, it wasn't in production for very long because of a restructuring of the Tri-ang product range that took place after Lines Brothers took over their struggling competitor Meccano Ltd in 1964.

Since Meccano Ltd made Dinky Toys, the takeover left Lines Brothers with two competing diecast model car brands, and rather than continue with the premium Spot-On range and kill off the more established Dinky Toys brand (which, after all, they'd just paid to acquire), the company found it easier to discontinue Spot-On (in 1967) and concentrate on Dinky. A few unreleased Spot-On designs then ended up in the Dinky Toys range as "Dinky" pieces.

It would probably have been difficult keeping the Spot-On brand going once the flagship range of products - the cars - had gone, and the initial association between the name and Castlereagh became less of an asset when the company were shutting down Castlereagh production lines and considering moving remaining production elsewhere. The Arkitex range was another casualty of the 1967 rationalisations, with one lone Arkitex-based building appearing in the Triang Railways catalogue, without Spot-On or Arkitex branding.

The dollhouse furniture range survived (as Lines Brothers didn't have another dollhouse furniture range), but underwent two rebrandings in quick succession, becoming Dollies Home, and then Jenny's Home.

In the Museum

The museum's display of Spot-On vehicles is in the dedicated Spot-On cabinet, which holds a guest collection of around 250 Spot-On vehicles and perhaps a hundred or more small accessories such as figures and road signs, the largest permanent public display of the range anywhere in the World.

See also:

External links

Further reading

  • Graham Thompson, SPOT-ON: Diecast Models by Tri-ang, A Catalogue & Collector's Guide (Haynes/Foulis 1983) ISBN 0854293043
  • Nigel Lee, Graham Thompson and Brian Salter, The Ultimate Book of SPOT-ON Models Ltd. (In House Publications, 2013) ISBN ----


Subcategories

This category has the following 3 subcategories, out of 3 total.

A

S

T

Media in category ‘Spot-On Models’

The following 55 files are in this category, out of 55 total.