Category:Marklin Sprint accessories

1971: Marklin Sprint Racing Manual, part number 0751 [image info]

Accessories

1590 SPEED CONTROLLER

– with connecting fittings – A very convenient shape, made of heatresistant plastic material – The push-type switch for setting the track current can be fixed by a ratchet stop to give any voltage required, and an emergency stop push provides interruption of the current without altering the setting of the push-type switch – The colour of the controller casing is grey – The connecting fittings consist of the connecting plate with a two-core cable 4 ³⁄₄ ft. long to the controller and another two-core cable 3 ¹⁄₄ ft. long with a plug for connecting to the driving unit - A speed controller must never be used for more than one car at any time

1591 SPEED CONTROLLER

– the same as No 1590, but with a red casing

1542 CONSTRUCTION KIT FOR OVERPASS

– consisting of two piers 1 ¹⁄₁₆", two 1 ⁹⁄₁₀ and two 2 ²⁄₅" high, with two bridge railings – All parts made of grey plastic - For making up a very strong overpass that will even span four-lane tracks.

1543 SUPPORT

– 2 ²⁄₅" high – Made of grey plastic with stubs on top face for fixing track sections to

1544 BRIDGE RAILINGS

– For reinforcing overpasses – 5 ³⁄₁₀" long – 1 ¹⁄₂" high – Made of grey impact-resistant plastic

1545 MECHANICAL LAP SCORER

– permanently mounted on a two-lane track section 4 ¹⁄₁₀" long. The instrument READS UP TO 99 LAPS for both lanes in both directions, and the dial can be reset by hand 5 ¹⁄₁₀" high – 6" wide – On tracks having several lanes a number of lap scorers can be set up directly next to one another in a row

1547 CONNECTING SECTION

– 2 ⁹⁄₁₀" long, plastic – For connecting two adjoining straight track sections and reinforcing the joints.

1592 RECTIFIER

– for connecting to MARKLIN railway transformers – Size 2 ¹⁄₅ by 2" by ³⁄₅ – D.C. for running up to four cars at the same time can be taken from the pairs of plug sockets marked "Auto 1" and "Auto 2" – The transformer connected in series must have an output of not less than 16 watts

6930 MARKLIN SPRINT D.C. DRIVING UNIT

– For use on 220 volts A.C. only – Output 10 watts at approximately 14 Volts D.C. – Overload protection by an automatic current-limiting device – Connecting lead with sprayed mains plug connection – Blue sheet steel casing – On the output side there are two pairs of sockets marked "Auto 1 " and "Auto 2" – Weight 2 lbs. 2 oz. – Size 5" by 3 ⁷⁄₁₀ by 2 ¹⁄₁₀"

1540 CRASH BARRIER

– corrugated section planking made of white flexible plastic – 6 ¹⁄₂ ft. long

1541 SUPPORT FOR CRASH BARRIER

– made of impact-resistant plastic for fixing crash barriers to the track